Separate names with a comma.
Xivlia, firstly the voltage on your dash is not the battery voltage across terminals, it is the on line voltage after it has been through the...
Fin, yes it could be. You can test it with fly lead from the battery to the small switch contact on the solenoid to confirm a faulty starter...
Stu, if you have a digital voltmeter it is easy to check if your battery is on its way out. Leave the battery off the optimate for a few hours...
That plug with the three pins is the source of most of the bikes reliability problems and electrical issues. These include battery related break...
Just cut the tab off at the back of the retaining plate and when you mount it push the battery and plate into the battery box whilst doing up the...
C, they only have the twill in stock and are waiting for a stock delivery of the plain, the proprietor said it will be 4 weeks before they have a...
DUCATI 749 & 999 CARBON FIBRE EXHAUST HEAT SHIELD IN PLAIN WEAVE | The Carbon King C. Is this the sort of thing what you were looking for ?
The later side stand switch energizes a relay that switches current to the RH switch cluster, with the engine run button set to run that in turn...
Mark, did the seller say why the frame and wheels had been painted to the post 2000 colour - or is the photo bad?
If you have a voltmeter check your battery voltage when the battery has been at rest (ignition off) for a few hours. Do not connect it to the...
Mak, if you or your partner have a hair drier (with a diffuser if at all possible) use that just ahead of where you are pulling/peeling and be...
Trans, remember the bike is designed to run in significantly hotter environments than the uk and the radiator is sized that way. For winter...
Some relevant info here https://www.gov.uk/government/uploads/system/uploads/attachment_data/file/366046/msva-manual.pdf If I read it correctly,...
Loz, Tesco are the only one I don't use due to long running issues with cars that had to run on higher octane fuels (a Lancia, Alfa 75 and an...
If your bike is stock and set up as it left the factory, running it on higher octane fuel could indeed make it run better as the factory set up is...
OR have you still got the cat installed and has there been any changes to the filters? 128 and 78 would be more than welcome, fingers crossed...
My base MY03 999 has a Termi race can but it is obvious it has not been accurately set up for the exhaust. Exhaust note sounds woolly on tick...
Cream, none of them like engine loading much below 3k and the 748/916/996 are particularly harsh if they are not set up precisely - even then you...
Bluey, pm sent
Stevie, measured with a steel ruler ID looks to be around 22.5mm and OD 26.5mm, I would give you a more accurate measure but can't find my Vernier...
