Separate names with a comma.
May be small things that can be easily solved. The 749/999 had a coolant hose that was incorrectly installed so that it rubbed on the blade of the...
This product was from a former forum member https://speedo-angels.com/
Got my invite on Saturday. Nearest place is a 70 mile round trip away, in an area with higher COVID rates than where I live. Will be waiting this...
Is this the kit you bought...
Is your cable plugged in on your screen shot? The COM port setting is not active. The software works with two ECU types, Melco = Mitsubishi (inc...
[ATTACH] What baud rate do you have it set to. This is a screen shot from a working device. Also USB or Bluetooth?
If you can get a Dremel in there, cut a slot and use a flat blade screwdriver.
Depends where you reference your OBD faults, as some list it as Fan Relay 2. There is only one fan relay found on the right side of the battery...
I used Displex on my 1198 screen
[ATTACH]
You need a rod to push into the connector. Once the yellow slider is pulled out the connectors are held in by friction. By carefully pushing with...
There are 59M ones on the Guzzidiag site. They should be OK for map comparison.
I invested in a Gunson Gas Analyser for CO setting. A 1/4” BSP tail fitting allows the reading to be taken from the gas take off ports before the...
No idea. Is some fettling required? Balance throttle bodies? @nelly ?
You can do it from the front if the hole exactly matches the wellnut diameter.
Deform what would be the brim (of top hat) and push through hole from back.
If it is the bolt then they are made of chocolate and round off. Try driving an oversized torx into it. When you refit make sure you copperslip...
On the Pirelli site...
Are they the manufacturers of the bolts on the 1198 fuel pump?
Might work [MEDIA]
