Separate names with a comma.
Make sure you lube your nipples lightly before trying to fit them, it makes it much easier
Grandad, this is the factory spec. Measured from the machined top face of the lower yolk where the fork tube clamps, 244mm to the top of the fork...
Richard, use it every couple of weeks for a few hours. The battery will last much longer (>5 years) if you don't keep it permanently connected as...
Haydn, if you want to go back to original fittings get the parts book for the part numbers and order them from Ducati, expensive but you won't get...
Funky, with the dry stuff it uses a solvent that evaporates in about 5 minutes leaving a very fine (almost invisible film), the solvent carries...
I use Wurth dry lube and it is easily the best I have used on any bike in 30 years. Loads better than the waxes and heavy grease ones. Unlike...
Keith et all, the problems manifested themselves most in bikes built (not necessarily first registered) in 1999-2000 and was due to a change of...
"They all do that sir." I have white clocks (with the obligatory crack in the temp guage glass) on my 748 and they really are rare as rocking...
Ollie, have a look at the parts book (should be a free download from somewhere). I cut this from the 01 ST2 parts book which I think shows your...
You may want to try Cobra Leathers in Swindon, ask for Annie. She repairs most types of leather goods from bike leathers to car upholstery,...
That'll be me, it melted a hole in the bottom of the battery case, funny thing is the bike worked perfectly at 19v and the only clue to the regs...
Mark, what bike?
Lusty, Louigi Moto is the place to go and all those on here in the know will tell you the same. He is not far from JHS, SW of Bath at Clutton...
Johnny, rockers don't wear to mileage the way you suggest. They wear based on a number of factors which include valve clearances, oil type, oil...
I agree with Chris on this one, the later model 748/9xx Shindenghen regs are perfectly ok and we have both discussed this on and off on the boards...
Same for me, on all types of bikes it was usually 1.5-2 rears to 1 front. However when I got the 748 it used to wear out the fronts slightly...
Indi, they usually only have parts and operators manuals not the workshop manuals. Red I have 748/916 scanned pdf and a late model full spec 748...
Anth, do you mean the same cylinder as the 998 (part number 195-4-003-1a)? Never worked out what the attraction of the aftermarket ones was when...
Brian, you need to check the integrity of the wiring harness that runs on the under side of the seat for any pinching, the wires sometimes get...
[ATTACH][ATTACH] Cranker I disagree, the MY00 Rs had Showa shocks and the TiN forks, the sub frame is an alloy mono as fitted to the R at that...
