Separate names with a comma.
All in the handbook. Adjusting will allow gear lever to be repositioned up or down. You should find moving it down slightly gives a more positive...
Shuffle them up, yes. Flip the metal plates - OK, except the one with the dot. That goes in same place with dot to outside.
Whip the clutch plates out. Note the dot on one of the metal plates and it’s position in the stack. Give the metal plates a rub down with emery...
Re 11, do you mean a graunching noise. Dust build up causes the noise. Cleaning the clutch plates helps. Some fit an open clutch cover and an...
Try adjusting the gear lever downward using the adjusting bar. Should make the change more positive.
This was in the news. Some people are just full of hate....
[ATTACH]
Adding low battery to check list :upyeah:
As it is a track bike you could always have the immo disabled in the ECU. PM me.
Right hand side of battery box behind the hoses. A PIA to get to.
To release the connector there is a small dimple button on the top. When depressed this allows the retaining cam to rotate forward. The connector...
Could also be an earthing problem. You can try running a jump lead from the negative terminal to a good earth. If the bike starts then check the...
2 quid part that causes 37.3 error
Replace the coil/injector/pump relay
Do you have an EOBD light on? If so, keep the left dash button depressed whilst turning on ignition. Keep button held until fault code shown.
As luck would have it your wires are purple and black [ATTACH]
[MEDIA]
Part number 24713912a, described as a cover
Rothwell near Leeds
Guzzidiag
