Separate names with a comma.
Let us know how you get on, sometimes it just takes ages to bleed, but a new kit will no doubt solve your problem
If the master is full of fluid, it should produce bubbles from one of the holes when it is pumped, as the air in the line is replaced by fluid. I...
Issue 1. From your description, sounds perfectly normal 2 of the bolts are long and for holding the clutch case on, they pass through the cover....
And double check the polarity, if the contacts have been swapped during work.
My mate has one. I'll message him Stein Dinse had this....[ATTACH]
I've not come across this before, if its a carb model I would've thought it would have 2 pickups. However my 2002 900ie SS was a crank sensor due...
Currently building a 1987 Elefant 650, Cagiva/Ducati hybrid
Do you not have 2 pickups? You should have, all the Ducati twins I've worked on have. Anyway, I appreciate what you're saying. There's a lot of...
A very wise idea, it's worth doing the pickups and all wiring too. They have a new version of the Ignitech, you're looking at the SPARKER...
Had mine years and never done it as I don't do many miles. But I've had them on cars and it's many many miles before you have to. I should...
If the above recollection has helped anyone, my work is done here. I was very lucky, and can only blame myself as I should've known better.
I'm also a K and N advocate, which I usually get for most of my bikes, the only exception being a BMC on my ZZR1400 as it gives more flow than the...
I don't use gaskets, Threebond all the way
That's a very good deal, I bought them from Electrex World and they were about £30 from memory. Being able to replace them in situ makes it...
You'll find that the early ones have a different hanger for the footpegs too, with nowhere to mount the switch
A wee story of near death for you that I feel I should tell. I bought some locknuts several years ago off Ebay, similar to the ones above with the...
Tough crowd..... I agree
Last time I bought the nuts they were locking, slightly squished
I would go with Tygon too, as it's the best Ethanol proof hose I know of.
Not seen this relay on any SS, was it fitted to later models as standard? The below is what the one on my bike looks like [ATTACH]
