Separate names with a comma.
I haven't heard of FCRs having a choke lesrn something new everyday. Mine don't either. I hope you have success in your quest, so filter was...
Yes
I've made my own too. However you sort it, it's a huge improvement. Good luck
It could be a number of things. Could be ignition too, pick up coils or ignition coils for example, hut the fact its been laid up a while suggests...
Don't disregard fuel filter if its had fuel Sat idle in it for a while
Mine have been ground off too
Some have longer output shafts, like the 748 and ST2
Not aware of any on the bikes I've had. Where does it go?
I've got one in the garage, can check tomorrow
Z will be the newer one? I doubt there's much difference
Let us know how you get on with the clocks please
Yes, when I put in a different gearbox and the shaft was longer
Or wiggle the sprocket, if the wheels not connected as per your pic
Does it shift when you wiggle the back tyre if its connected? Sometimes it just needs a little help as the gears can be a little 'sticky' when...
Can anyone confirm if that should have the stabilising rod on the back brake of that one? Mines an early over slung
Rob, PM sent
Looks factory!
Gaz, runa wire from the body of the rectifier to one of the screws ino the front subframe. The screw will earth it and there's no need to grind...
No, but I've seen it on the carby, which has a similar setup, not nearly as long as those though, would a triangular brace at the base of that arm...
That looks a lot nicer. And everyone knows that Sils are the best
