Separate names with a comma.
The best trade in I was offered was £3,700
I sold my 2010 with panniers and a full Termi system and 41,000 miles for £5,600 but I'd had it 4 1/2 years, done 27,000 miles on it and only paid...
I just checked the backlight, it's already on the LOW setting :(
Good to hear it's fixed. Strange how the speed sensor affected the hands free system though.
I'll give that a try Bob. The dash screen is certainly bright.
With a clear background it isn't going to work very well on a red bike nor a white bike.
I've bought a Rider 410 earlier this year and I just tried it. It is exactly the same. It comes up with a dozen or more Balas with the Romanian...
Good to hear it was something simple. I hope you aren't going to lay it up for another 4 years now. :D
This is from the ST3 manual which uses the same tank. 38 is the feed, 37 is the return. [ATTACH]
As the regulator is in the tank it shouldn't matter. I can check which is which later.
Ah, well you might be right then. No speed reading would indicate a faulty rear sensor. It shouldn't prevent the bike from switching off though.
The black bit is the timing sensor and should be around 0.7mm clear of the teeth, almost touching.
I was out for the first time in the dark with my bike last night and was unimpressed with lights. The dip beam isn't too bright, although coming...
As fas as I know these sensors are hall-effect, not inductive, and I have never managed to get a resistance reading from one. I had a similar...
I'd also be concerned about why it has broken. Did the water pump seize?
Hate to be the bringer of bad news but as NM says it also drives the camshafts and has the lower belt pulley on the other end, it is called the...
I did a similar fix to mine, both the LH and RH covers. I also repainted the control lever clamps that the mirrors are mounted on. The most...
The fuse marked "Optional Key" supplies the USB socket, the optional Bluetooth module, the supplementary socket (situated near the steering head...
My method was to make a hook out of an old wire tent peg and attach it to a slide hammer. Hook the hook into the cross bar of the baffle and...
I really don't know but since no current would be flowing it certainly wouldn't be overheating. However, with no load the stator would be creating...
