Separate names with a comma.
Download here http://www.ducati.com/services/maintenance/index.do Wiring diagram is at end of handbook
Cheap source of Mahle KL 145 Fuel Filters http://stage.buycarspares.co.uk/mahle-fuel-filter-kl145-1 Fitment...
Back from the Bol. Just for good measure it pissed it down from north of Troyes all the way to the Stanstead turn off on the M11. I thought it was...
3 way is the diagnostic. Does the 2 way have a link wire in the end? If so then it's for the immo circuit of the factory alarm system (when fitted).
The wire outputs ARE the same and in fact terminate at the same ECU pins E3, E29 and E32. The difference is that the ECUs are configured...
Ignore the last post. I was trying to remember when I built an intercept cable foran innovate LM2. The wiring outputs are the same on the 999 and...
If the TPS is OK then don't remove it. You need to reconfigure the wires in the Connector. You need to swap the 5v supply and the output voltage...
Looks great, Ian
Well it was nearly Bust!!!! Hadn't realised September is monsoon season in France. It actually started raining after the Dartford crossing. But...
Bonjour. Back on Tuesday 22nd
Brignoles
Hence why we are staying 35 minutes away :upyeah:
Just need to pack and then all ready for the Bol. Chunnel tomorrow afternoon and then on to Troyes for an overnight stop. Thursday sees us...
1. Coil H 4. Relay switch 5amp 5. Injector 10. Diagnostic 11. CPS 13. Water Temp 14. TPS v supply 15. Diagnostic 16. Earth 17. Earth 19. Coil V...
Download the owner manual from the Ducati Maintenance site" the wiring diagram is at the end. You can trace the pin outs from the ECU to components.
Cheshire
Try the solvent adhesive as used on Airfix models. This melts the plastic to make the joint.
You need to do some continuity tests from the TPS connector to the Motor side ECU connector. You should have a black/violet wire that goes to pin...
Candidate for the secondary earth mod to begin with. Then consider doubling up the +ve wires from the battery to starter solenoid to starter motor.
Tried them on my bike. Output was poor. Back to normal bulbs.
