Separate names with a comma.
I have been chasing an idle issue on my Carby for sometime. Simply would not idle well at all, with one cylinder working sometimes and more often...
Mdina Italia do some Rich. As does this company!! https://rsrmoto.de/collections/supersport-light/products/406?variant=48252168339 Forum discount...
I know Al, I have had some issues with them already, however I will persist as when on song the things are awesome. Biggest issue was the...
Sev, I have no issue with making a plate, I can put something together, not to keen on hacking at the carbs to mount a rod or similar, I will have...
Has anyone here hooked up a TPS to their Ignitech and FCR equipped bike? I was wondering if it was easy enough to do without buying a kit from the...
Nice work
Are the heads big valve?
These also fit the 900SS and 600SS however certainly for the 600 they need different jets. For your info.
It looks like a genuine 1000ss or ie swingarm, you can see its curvy
If they are used belts they should be a little looser. Think it should be about 10% less tension iirc.
I think this ones Ricambi on my Senna, it's nice looking but flimsy. [ATTACH]
Stein Dinse do valves. A full engine strip and rebuild could be costly if it's damaged inside. Bearing etc can be costly.
It's definitely a metric size, I can check when I get home
I got an old cheap deep socket which I drilled a hole in the side of. This then allowed the wire to feed through and I could remove the switch.
One of my dream bikes, not in a position to buy :(. Lovely example, glws.
The switch itself is a very simple device. I would try the shimming described. If you need another switch I have one I could supply.
I rebuilt my engine last year and the plug I got from Ducati for 10gbp was aluminium. Put threadlock on and use a centre punch on the edge a few...
Drop the oil, take the oil stalrainer out and put a small mirror in. You can see the oil galley plug from underneath the crank. I bought a small...
The only thing I can think of is the barrel studs causing problems. You are looking for dark studs with an 'O' stamped on the end
Don't brim it anymore.... found out hard way with pool of fuel on garage floor
