Separate names with a comma.
Bit late to answer your questions but I use a diamond flat hone for the shims to keep them flat. That spring clip does easily deform from removal...
Take the breather pipe off you can run it without to test, also open filler and blow through the small pipe where the breather attaches at the...
I agree it sounds like fuel starvation, iridium plugs can also be hit and miss in these bikes
As soon as the ignition is on, the pump runs to prime the carbs.
I dont think the small gap on the valve would cause that noise, but I will wait to see what you find.
The rear shocks can be rebuilt
John, The mesh filter sits in the middle of the sump, if plastic does break in there I would hope that it wouldnt move from the bottom, however...
I understand the concerns around FCRs as I have had them now for a while and still tweaking with them as Ive been setting them up myself. However...
You may have to destroy it and buy a new one, Its only plastic, with brute force itll come out as its pretty flimsy.
This looks like its gonna be a feckin awesome bike
A reverse thread drill? One of mine has been helicoiled before.
If we are talking a standard 900SS here then theres various thoughts on oil, just search on Google and theres all sorts of opinions on the best...
Mines a Ricambi Weiss, so looks like the SL. Guess you want more unusual pics?
I have also tried this before, the part numers underneath are different, even though the catch can be swapped
A 1993 900SS, a 2002 900SSie, a 2002 ST4S and enough spares in my loft to build another carby.
Have you checked both plugs for spark? I had water in the plug of my crank position sensor last week, giving me bad running issues. Crank position...
Well I stand corrected, I had a hell of a time trying to find them
I rebuilt my 900 last year and the bearings were only available from Ducati themselves or Ducati parts suppliers. They are not cheap, about 75gbp...
I would check the throttle body balance too.
Thanks for all the suggestions and help, the latest is that the solenoid I had on was loose on one of the bolt terminals. I thought that changing...
