Separate names with a comma.
Who told you to connect to the DDA? Pay them a visit and kick them in the NUTS. The 4 way connector on the DDA is identical to the diagnostic...
Mike, the pins on the Coil connector (a 3 way BSK Bosch) are 1 = +12v from coil/injector/fuel pump relay 2 = earth 3 = ECU trigger The black...
Everything you need is in this post Free Diagnostic Software | Ducati Forum
It needs disabling in the ECU so you don't get an EOBD on the dash. The pulley and spring can be left in place as they hold the EXBV in the open...
With an IL4 you can use the old 3 for 30 for riding round town. With a V2 you find 2 for 30 works better together with a little clutch slip when...
The ECU needs to know when the throttle is closed. It gets this info from the TPS. The usual indication that TPS is out or faulty is stalling when...
Speak with a local company that does motor rewinds. They may be able to refurb it for you.
[MEDIA]
27 is linked to the Run/off switch 17 is linked to ignition on through main relay
What year bike? The 2001 ST4S DP cans did not come with another ECU. The set up just required some adjustment to the fuel trim. Later bikes using...
It is at the end of the owners manual (2001, Superbike, 996R, UK) Download here Ducati
Have run your problem past a contact of mine who tunes Ducatis. What is the cranking speed of the engine like? If it is too slow it could cause...
I have just used a Spanish Motorcycle clothing retailer to purchase a new Alpinestars Orbiter suit. The cheapest price I could find in the UK was...
1st April !!!!!!!!
The sale is on behalf of the widow of the former owner.
I wouldn't take the ECU connectors apart. I would check the pin continuity with a meter and with reference to the wiring diagram
2003 999 with under 1000 miles http://www.ducati-upnorth.com/forum/showthread.php?20365-2003-999-with-under-1000-miles...
There's a dash on Gumtree for £80 at the moment http://www.gumtree.com/p/cars-vans-motorbikes/ducati-999749-speedo/1050738282
The DP ECU disables the lambdas but the EXBV is still operative. You can test by disconnecting the EXBV motor connector (which is behind the...
Disable in ECU, consign motor and cables to parts bin. Sorted.
