Separate names with a comma.
Thought this might interest some of you on here. For the past month I have been tuning my 1198S using an Innovate LM-2 (single Lambda version)....
The -ve to a good earthing point is good practice and will prevent polarity inversion. Your lead is FTDI then. The ECU can time out on igntion...
Do you definitely have a FTDI based lead? You can distinguish between FTDI and Winchiphead as the latter will illuminate its LED as soon as you...
You might also want to check the bearing on the clutch pressure plate. If this has failed or is not rotating freely then it can cause problems....
Thought you had given this a technical term "Relaydictomy" :wink:
"Do a barrel roll" is known as an 'Easter Egg' There are various ones embedded in software. If you have Google Earth then there is a flight...
Just look for Easter Eggs using Google for more fun
Wasn't there a thread on the forum about 15w50 being the recommended oil? I'll still be using 10w40 as I've got 8 litres in the garage.
Hutch Clear your Inbox :upyeah:
Scroll down until you see 'Click here to start download from Sendspace' and use this link (stops all the crap) Click here to Download
2001, Superbike, (choose model), UK (748R.996R)
Go to the maintenance section of the Ducati Website and download the Owner's Manual for each bike. The wiring diagram is at the end of the PDF
Just dug out my 996 Haynes Manual and it shows the reinstallation without the need for the tool. Sent you a PM :upyeah:
The tool has now been superceded by 887133334 I believe it is required to complete the job Do you have the ST4S workshop manual?
Bit more info from John. The 1198 was a 59 plate with 20,000 miles.
What ECU are you running? If it is the stock ECU not the DP then you could always dump the current Termi map and save. Then load the zero PCIII...
From the manual re Can Bus The signals exchanged over the CAN line between instrument panel and engine ECU are as follows: - Motorcycle speed...
DTC :wink:
Spoke with 'Ducati John' Cellier today. He told me about two bikes he has recently worked on (1198,SF) where both had abnormal wear between the...
If you design it, these guys can build it Custom Stainless Exhaust | Stainless Steel Exhausts | Stainless Steel Performance Exhausts | Shipley |...
