Separate names with a comma.
So long as the immo is disabled the 2nd hand ECU will work with your bike. As it's a 2005 bike it will likely be an IAW5AM. I wouldn't even bother...
A refreshing change. Good for the dealer :upyeah:
From your avatar are we talking a 749/999 All depends on which ECU you have. If it's an IAW59M then JP's writer will disable the immo not...
The standard Yuasa supplied as OEM is a sealed lead acid battery. A Gel one would be an improvement though.
Any smell of rotten eggs and the battery getting hot? Possible reg/rec fault? This is a good article about fault finding on the charging circuit...
The 999 uses a sealed battery due to it being mounted on it's side. The battery you have been given is unsuitable if it is leaking acid. If the...
Anybody have a dead/knackered Idle Stepper Valve they would care to donate to a little project I'm looking into? I now have the capacity to...
They need to get both coil sticks out and thoroughly blast the sparkplug recesses with an air hose. A liberal spray of water dispersant is then...
Buybits sell them TECHMOUNT 70050 Ducati Speciality 50mm Euro Fork Tube Mount (SKU 7357) :: [ BuyBits ]
RAM offer a number of mounting solutions that work. They're not cheap though. Powerwise I tap into my Optimate flylead with a 12v socket then use...
Critique is also valued
XxAnthxX did these for me [ATTACH] [ATTACH]
If it helps, the blue o-rings are made of Fluorosilicone. Your local bearing company may be able to help.
Ebay link Triumph Alpinestars AS1 Sports Boots NEW 56% OFF RRP | eBay
They're Triumph branded but these are a great pair of boots. I bought a pair 2 years ago and they have stood up great to daily use. Mens...
The hex width is 26mm internal, 30mm external. So should be OK?
Cheers for that. Looks like a MK2 version is required. I have 30mm of hex to play with. The socket wall is 2mm, will that clear?
I was just saving time using some bits I had in the garage. I originally intended to cut it much shorter and weld a handle onto it. The frame gap...
Thanks for your valued input
Had a bit of free time today and tried to create my own 26mm holding tool for the cam belt tensioner on my 999. It is based around a 24/26mm...
