Separate names with a comma.
I had the clock faces changed on my 998 and I watched while it was done by Superdials at the time. It's not a job for the faint hearted though....
Been a member of this for a while, some topics are well researched with some good links. He has an E book that's available that covers all of his...
Try eBay for a clear pad from someone like Bike-it. The paint shows through and looks much like you have no protector, if that's a look you want.
I'd agree that it might be the caps, I would try stock ones.
Oil cooler fittings have caused me problems also and one of them cracked and started weeping, over tightening needs to be avoided if you do need...
Also done, I didn't know anything about this until a few days ago.
Pro bolt should do them as per OEM look. They certainly do them for 748-9** I assume they are the same. I have them on all my bikes.
As above and if you can get the front wheel off the ground you can check to see how easily the wheel turns with the brakes off, there should be...
I have Iridium plugs in all my bikes and I have never had a problem. I tried Champion QA55's on my 748R but it didn't like them after a few miles...
My 998 has a bypass on it that allows the bike to be started on the stand but if you put it into first with the stand down it cuts out, best of...
If he is a scammer it's highly likely the address is fake or real but not related to him. I have had many scammer attempts on me, the usual...
The decals are quite unique and I would say that to look totally authentic then it would have to be Ducati only and I imagine they are very expensive.
I've only got 5 years to go then according to this!!!!
The screw is a Philips head unless it is a much newer mirror as per 998's as some of these used a torx screw of the same size as the fairing...
As above engine weakness and changing belts possibly unnecessarily at times.
See if there is any lateral movement by pulling the flywheel up and down, any movement could be the sign of a bearing either going or having...
I found this link whilst replying to a thread about main bearing problems as several people seemed to have suffered this problem at the moment....
