Separate names with a comma.
Early models only had a Showa rear, from the photos which are not that detailed enough I would say it's a genuine early R. The price is high...
The 748R frame is the same as a 998 frame only with different coil location brackets, often called the Kyalami frame. There is quite a lot to...
The main cases actually don't get that hot so if the paint is decent it won't peel off. Mine is still good after hundreds of miles. The side...
Tom I on here has a number of RS race parts and he broke a 748RS a while back you could try sending him a PM.
Toffee wheels only really work if the decal sits in the surface, if it's a genuine Ducati decal then it will be lacquered over and then it won't...
Then do you mean this type, which is the P8 ECU type. These are more common there is one on eBay now $125 from the US plus P and P [ATTACH]...
I know the one you mean, they are pretty expensive though and pretty rare. I have one for the P8 subframe but not the one you are after. Is this...
I used silver wheel paint which was quite close match to the Ducati original. You can buy the frame silver and have that put in a can and that...
I repainted my 748R engine. The job is made a lot easier if you have an engine stand and you can turn the engine over to paint the sides and...
Did it make much difference. I would be interested as to how it's done as I have often thought about doing it but wondered what's involved.
I use a Dremel and clean out the area of the decal and then build it up with primer and then rub the whole panel down. You have to be careful of...
I believe the race setting is for use with the lengthened swinging arm, although a Ducati manual that I read recently seems to suggest you can do...
If you send me a PM I will give your more details.
^^^ What will it cost to service in that case. If strictly adhered to then that is going to cost a lot of money to cover those thousand miles....
I have a 998 and I can confirm they are a nice bike, plenty of grunt but they do not rev very highly, it's quite a different ride to a 748 of any...
^^^ I agree with the above, and it is an import, that could affect resale value if you ever did sell. You could have a 998 or even a 998S for...
I personally strip every tank I repaint to bare metal and then etch prime it, prime it again with high build primer and then paint it. If you...
Have a rev limit cut out helps to have added as well. I had one added for my bike as I use it for the odd track day here and there and that's...
^^^ I agree I was lucky, but when I bought the bike I actually paid the going rate at the time for it as it was a couple of years back and prices...
^^^ A base 748 does not ride the same as an SPS or an R as they rev a lot higher and pull in a different way, so it will always be difficult to...
