Separate names with a comma.
Wheel could be out of balance, rim of original bike distorted, run at incorrect pressures, lot of things can start problems off, even the type of...
Which bracket do you mean? The front is the same but the rear is different. The lock plate is the same, so in other words two out of three...
Etch primer is not high temperature paint, so using it on anything that gets really hot will only cause the paint to lift off. I used Hammerite...
I had a frame powder coated in red and there is no exact RAL match that I could find but I did get one that was fairly close. You are better off...
I got some spray on engine paint from eBay and it has worked well on some engine side casings from a 748. Hammerite satin black spray also works...
You may have someone already lined up for your engine, but I took mine to Ducati John and he stripped it while I waited and it then gave me a good...
Moto3 is a don't miss and only on iPlayer for 5 days, another race you couldn't script.
Sky didn't show Moto2 or 3 by the looks of it, and there is no catch up and nor is it on later in the week to even see the highlights etc....
Windy in London now but rain not bad, just been out with the dog and typical bins and plastic bottles sliding about in strong gusts, tricky day to...
If it is on the headstock it can be masked off with no problem but the blasting does tend to dull the stamping and make it harder to read.
This is a common problem and I have got a few of these out now. You need to soak it in penetrating oil and work on it over a period of time, it...
Quality control really is the answer and outsourcing and confining it say to other EEC countries doesn't always work. Porsche had cams made in...
Another one for levers!!!, actually pretty good and have lasted well and a lot cheaper than some others I have bought in the past.
Will you need bigger air tubes, I had this problem once and found there was more to it than just swapping top fairings.
Nearly £8.500 for a 998S seems a bit steep especially for the mileage, mine has done less than that from new but it's not an S. I notice though...
Clearcoat is an alloy coating for mostly polished Aluminium it's not the same as lacquer used for bodywork. Eastwood products sold it over here...
Devcon is an alloy based repair paste, but I would say that it's darker than bare alloy and not cheap but it would serve to fill the hole or pit....
Looks neat and a good price.
Seems a lot of money to me and an original model A started off with dual shocks the mono shock model came in with the C model so I am not sure...
Newer 748's such as 748E's are likely to be more of a daily use type of bike as the later ones were the entry level model. If you aim for a...
