Separate names with a comma.
My Monster has always turned over slowly but recently got worse, and due to it having no chokes in the carbs it can easily flood if it doesn't...
Quite possibly but the seat pad should be the same and so fit the older seat/subframe, minus the brackets of course.
IIRC later bikes had the extra brackets to help secure the seat. I think because the older, no bracket seat, was more likely to detach if the bike...
Does this help? [IMG]
To add, Chris is the man. He worked wonders on my 916 and Monster - highly recommended. :upyeah:
Welcome and, with regards to the 848 wheels I think the rear should fit but the front will not, at least not without major work. For starters the...
A pocket.
I'd get the renthal (or similar) carrier, in fact I did after mine popped a cush drive and chewed up the eccentric - it all happened in just a few...
Unless it's race bike and you're at an elite level, you're probably better off using stainless, certainly from a price point of view. Titanium is...
Can't confirm 100% but I know that a 999 top yoke will fit a 916 forks/stem because I did fit one to mine once, only thing that doesn't work is...
Mine melted the fuse holder, looked like a lump of sticky snot - was still working fine though. Simple enough replacement and a reminder to keep...
I've got MBP retainers in both my 916 and M900, only the 916 needs the modified opener shims as the M900 shims are bigger and the retainers fit...
If it's only 8cm, something like this; https://www.ebay.co.uk/itm/254506325288 My latest workshop extension has around a 9cm kerb to the...
I think there were some 750s with a dry clutch though only a 5 speed gearbox. There were different versions of 900 head, do the heads have a...
Nice but, those Dzus clips facing forwards make my teeth itch...
Have also re-used the 'O' ring, just let it dry out and it shrinks back to original size. Though a couple of years back I bought a lifetime's...
Unlikely an old filter would cause a complete stop of fuel? spluttering/rough running etc. especially at big throttle openings, even fuel pump...
Also linked to the breather (by the 'Y' connector) so can cause running problems if it is blocked but, as above not if not connected.
No.
Do you have the original plastic, quick-release fittings on the fuel pump/tank base? You could try 'cycling' the pump (ignition on) with the...
