Separate names with a comma.
Doubt there's enough meat left for any insert. Possibly grind away, fill with weld, re-drill and tap but it's a bit specialised and will require...
I had a 250 scrambler many years ago and at 6ft/12 1/2st I fitted fine on it. Thought it was the bollocks back then but would doubtless find it...
Good point, I got the blocks with the yoke and I don't think I'd have got the stem out without them as it's tight in there and the stem's fairly...
It was some years ago but when I fitted Ohlins to my 916, I found that Harris had quite a few Ohlins billet 56mm yokes in stock. Turns out they...
Fair enough, wasn't doing the maths. I was just dispelling the myth that you can't turn the engine backwards.
Or, turn it back a bit more than 90 deg and then turn forwards to the 90 deg position, you're only trying to eliminate any backlash.
Some years back, I was using the 'racing' clutch pack on my 916 - has thinner (and one extra) sintered friction plates and I removed 2 springs as...
What's the overall thickness of the 'pack'? I find that going slightly under the recommended (38.5mm IIRC?) helps with drag, especially if you...
On the old dry clutches it is not uncommon for the large 'star/snowflake' shaped washer to eat into the hub, meaning the hub is not held back as...
Both the 916 and Monster, over many years.
Never seen those thin plates, can't see why they would fit them? Personally I don't bother with any dished plates, just friction/flat plain to...
If it's a single wire (not multicore) then it's not some kind of proximity/sensor, sounds like a plunger switch to me. The older bikes (like...
Not sure if that's a definite marker? I've got Marchesini 10 spoke forged ally wheels and they have 8 holes.
I had some battles with piston rings on my Monster, problem being the JE pistons had chrome rings (at least the oil ring) and it buggered the...
To add, here's a pic of a shift drum I've got stashed away. The neutral indicator is the round headed rivety thing near the end (opposite to the...
Can't see how? if the gearbox is like that of a 2V/Desmoquattro (and I think it is) then there's a 'pip' on the shift drum that presses the switch...
I find the vice type of clamp on my table quite useful, not as stable as a roll-in but (by redrilling the base of the table to widen the vice...
Maybe there were variations? but then mine wasn't fitted to the bike when it was made, I bought the damper with mount aftermarket and so assumed...
To add, Harris appear to still be around and list a mount for 748/916/996/998 for £40 on their website though it is a 'Harris' mount rather than...
That's like the mount on mine. Not sure who made it, I would assume Ohlins? Mine came with it, maybe try an Ohlins dealer. When I bought some...
