Separate names with a comma.
The clipon clamp needs to be correct when you buy one, earlier ones are one bolt on the fork stem and later ones are two bolt. The handlebars are...
^^ I'd be interested in the answer myself as single phase and three phase use different alternator setup's one revolving inside and the other...
Genuine Ducati seat is the easiest to fit as all the seat fittings are moulded in, sometimes you have to mould them in yourself and you then need...
It might be best to try both if you can get hold of them cheaply. The real way to go is to get a custom map on your chip. I had to do this with...
I made one up using angle aluminium and then used a pillar drill and a Dremel to cut out the shape of the air flow sensor, I used the original...
Do you want it repaired or repaired and painted. I can do plastic welding but I would not have time to repaint the panel. I have repaired a...
All the single injector looms are the same as far as I am aware, a mono rear loom is longer though. Fitting the 996 chip would be all you need to...
All very common issues that many owners have. The headlamp has already been mentioned and just needs cleaning from the inside. Some have...
The rubber part in the tank is a breather extension that fits under the standard tank cap, it's not used on the race filler caps I have fitted and...
Actually seen this happen, strangely to a 998, air filter tube smashed to pieces amongst many other bits in a crash at Paddock Bend at Brands,...
^^ SRS race fairing stays come with flats on them to do just that and having used one in the past I can say it works just as well as any other...
Chris Steedman is a leading light in this area and he has a superior knowledge of Ducati's. He invested a lot of money into the set up that he...
CJS can set up a full map with all the necessary parameters and far better than any Power Comander could ever do, they also they tend to unleash...
I think stock they go from 125 bhp approx to 136 bhp. A good set up on a dyno could easily give you more. Contact Chris Steedman at CJS Ducati...
I'd say 998 or late model 748R full Ohlins spec.
Ducati used to sell a kit to uprate a 998 to 998S spec. it was mostly cams and a 50mm exhaust as I remember. I doubt that you would be able to...
^^^ I was lucky I got both mine off eBay! a lot cheaper but I have never seen either item come up since.
Mad Duc do a aircraft style switch to replace the Ignition, I have one and they are not cheap but they do have very heavy duty wiring and it's a...
If you try and use a collar and shrink it on try and close the spilt up as much as you can. When you get a situation where the cases crack in...
^^^ It does depend on how you set the seat up and what seat you use, my effort worked fine. I now use a custom made subframe but it still has the...
