Separate names with a comma.
Brand new from Ducati, had to be ordered in Took the filler neck off again, cleaned out the inner part where the cap seal sits, checked the O...
Doesn't appear to have perished
So, this morning, I reduced the coolant level in the expansion tank to the low mark, fitted a new hose clamp to replace the missing one on the...
I replaced the O ring and the expansion tank by the same time, the filler neck and cap are the original ones though
Careless
Chinese
Quick
Mcflurry
TT
I will replace the missing pipe clamp, reduce the coolant level to minimum, and run it up to temp again in the morning, and get more accurate info...
I know it should, I can see the markings where it should be, the question was more along the lines of, with the clip missing, would/could that...
Cat
Picture
I will check the level, and drop it to the minimum level, and try again
In the video in the opening post, it shows the steam/coolant appearing to come from between the expansion and the filler neck
Bike upright, filled to the max level on the side of the tank
Netball
Normally, just over running temp, I have tested the fan, which does kick in and out as it should
Just an observation, the small pipe that goes to the secondary expansion tank, doesn't have a jubilee clip securing it in place to the upper tank,...
Maradonna
