Separate names with a comma.
Probably recommended but I had a near full bottle of Motul 5w (there you go Mr Bimble ;)) fork oil on the shelf and couldn't be arsed to go out...
Likewise, well worth the small premium for the air lifting. Because if not you'll be pedalling the thing up and down all day, much easier just to...
Champion are for your lawnmower, use NGK in your bike...
I have an underseat breather box on my 916 with the large corse outlet on the casings and corse reed/breather in the airbox, however the corse...
I'd go with the Motobatt (in fact I did), it maybe heavier than other batteries but starts first time even after weeks of no use and lasts well....
Yes the combination of Newman and MBP rockers is very good, I hardly ever need any shims changing with that setup. Best to do the job once and...
I had mine done by Newman, as said above, better than original (and cheaper than buying new originals) as they won't flake. That said I've got a...
Keep the 916.
You will probably find that mono frames for 16m are difficult to find. That combined with finding a P8 version at the right time and price led to...
It is but you can make simple brackets to make it fit the 1.6M, although you will need to extend the wiring.
That's a Corbin though which I understand are firmer than Sargent?
Then that is all you need. Can't see any reason to fit 916 TBs?
Would imagine that they would fit OK, but disconnecting the 2nd injector on the 996 would do exactly the same thing I would think. Both options...
Can't comment specifically on Sargent for SS but I've got Sargent seats on both my 916 and Monster and on both they are far more comfortable than...
Then again, it's 18 years old so if it's not stolen and it runs then is the service history from years back really relevant?...
Likewise, an almost new rear on the 916 and in the tread just like the above. Use a proper 'from the inside' repair plug and it'll be fine.
IIRC the standard 916 pulleys are black and the larger ones I have fitted are gold coloured and were originally fitted to a different model, they...
42mm, they are however offset, following the curvature of the bracket so the front hole is around 10mm further in (towards the bike) than the rear...
Not sure if 996 is the same with regards to valve/piston clearance etc? but I had my 916 heads skimmed by 1mm. Cams needed re-timing and a larger...
I had a head gasket failure on the vertical head on my 916. It leaked all down the back of the cylinder but no coolant got into the engine. If it...
