Separate names with a comma.
I've got a QB carbon hugger. Doesn't have the exhaust clearance 'dimple' and has never touched the exhaust, it does however tend to sag slightly...
K-tech; http://www.ktechsuspension.com/ based in the midlands, you'll not find better.
The one on my Monster is 12mm but it also has a 2.5mm 'hollowing' machined into it but it is not an original Ducati part so not sure if that...
I looked into this with the Guzzi and there were insurance complications, making it almost impossible. Not to mention that it was ultimately...
I imported a Motoguzzi from Italy 2 years ago, I went over to view/buy it paid cash and got all the documents (like you have) but in the name of...
Indeed, the red cord that is inside the belt rubber and often claimed to be kevlar is glassfibre (Kevlar is yellow BTW).
Get well soon. :)
M10 x 1.0mm, (same as brake banjo).
Looks well cared for, a bit too blinged up for my liking though.
I don't know for sure what it is from, it was advertised (ebay) as 1098RS but although a similar design/shape to 1098, it is much bigger and has...
I bought the hoses from a US ebay seller, they were said to be for 998RS? Whilst they had the right fittings they were too long as this, pre-cut...
My Monster; [IMG] Cooler is from a 1098RS and also uses the push-in fittings so needed special hoses. Other alternative is that some of the...
The Termis for 916 series bikes (and others, e.g. Monster etc.) have a rough finish carbon fibre rather than the smooth glossy finish that other...
Mange tout?
Both sound low to me? Not sure what they should be but I'd have thought around 150psi?
Yes but he said buying this would spaff all his budget for the D16 which is what I was getting at. I'd also take it over the 1098 race bike too,...
Personally I'd take an 1198R over a D16, more practical especially with regards to maintenance, better power (torque) delivery IMO and both are...
I use 2 axle stands under the footpegs. The Ohlins on my 916 had a leak, turned out to be a stonechip in the chrome on the pushrod - needed a new...
Assuming you changed the oil seal in the output shaft? (clutch end, by the bearing that the pushrod goes through) If so, are you sure you fitted...
I thought the VAT only applied if you bought the vehicle ex VAT, i.e. from a dealer specifically for export and as such they charge you a net...
