Separate names with a comma.
Looks well made but, what's to stop a thief with an allen key simply removing the caliper bolts and taking it off?
The stock bolts are plated steel so should be fine, I used them on my 916 with Translogic sensor, also was advised by Translogic to use stainless...
Don't know about the Ducati speed sensor but the Translogic sensor on my 916 needed to be moved slightly away so that it didn't read the body of...
Didn't remember the number but I recall when fitting the caliper that it seemed to me that even before reaching the setting it was already enough...
I use a couple of axle stands under the footrests; [IMG] As for tightening the caliper mount brackets, I always shy off the quoted torque as it...
Always said those dished plates were shite! How can a plate that doesn't make full contact with the friction plate (unless the friction plates...
Yes, they're expensive. There maybe cheaper out there if you search or, as above grind some 2mm.
Also, if you had access to a surface grinder you could get some 2mm ground down - I thought about this as I've got loads of spare 2mm but it was...
Edited to say - Sorry I meant 1.5mm not 1mm! First I tried a UK dealer but was told that although showing on the system, they couldn't order...
I needed to reduce the pack thickness on my Monster's clutch as it was a tad too thick and dragging, making finding neutral whilst stationary...
Unless they're something special then the 54mm cans will be the same size as the 50mm (and 45mm) only the inlet pipe and possibly the actual...
The MOT test covers headlight alignment and AFAIK a KM speedo is not illegal? Although you may need an overlay. I imported a Guzzi a couple of...
When I bought the 10 spoke Marchesinis for my 916, I looked into the weights and found the forged ally wheels were only a little heavier than the...
Agreed on the wheels, suspension improvements are great but lighter wheels are the best single mod you can do by far, especially if you're...
Not too difficult in terms of work but fairly costly, although you may find the 1198 Ohlins easier/cheaper than 916 series Ohlins as they are more...
Couldn't say, I've not tried 916 Ohlins.
I would agree, I had the Showas re-valved and sprung by Ktech and it was a big improvement. However, I have since fitted 1198S Ohlins to my 916...
I maybe an old fart? but I like the engine braking and rev matching for a smooth downshift and have never felt the need for a slipper clutch -...
Get an ally tank, it's well worth it. My original tank lasted years, then when it broke I got through 4 or 5 in a couple of years, one only...
Being an import (they're all actually imports) may affect the value when it's new as the point of private import was often to pay less as they...
