Separate names with a comma.
It is just a catch tank although as it feeds into the bottom, the header tank can also suck back the overflow if required. Mine broke where the...
CRG 'Lansplitter' mirrors, stick out from the end of the bars but hinge in to get through tight spaces and like a car mirror 'click' back into the...
Are you sure? Maybe certain alloys of it are but I don't think Titanium is. Some grades of stainless steels are though.
The outer race of the bearings are up against the wheel but the spindle butts up to the inner races and you tighten that up against the spacer,...
Those gear indicators work by referencing engine speed vs. road speed so will only work if it has a signal for both. Does/did the bike have a...
Good luck with them helping. Years ago I contacted them regarding flaking rockers on my 916 (which was and continues to be a known quality issue)...
Seems a weird size to me. 94mm is 944cc and the most common oversize, especially because Ducati themselves made it. I would have thought that...
Well I'm happy I don't have one to tell. Yet...
Ducati cambelts run at much higher speeds and temperatures than a Buell drive belt. Consider the cambelt runs at half engine speed (so at...
Can't help with the pistons but you can get rings from Total Seal; TOTAL SEAL PISTON RINGS they make all sizes, I have the gapless top rings for...
I've just measured a brand-new Newfren alloy friction plate; overall thickness is 3mm, the alloy plate is 2mm, so 1mm overall of friction material...
Case saver should be close enough to the chain to prevent it coming off and smooth enough for the chain to slide on. In the event of the chain...
The 3mm is the overall thickness of the plate including the friction material, the friction material is very thin and will be OK until there's...
I use an old, long screwdriver with a hook-shape ground into the end to get a good purchase in the notch. Using careful but firm hammerage tap the...
You could also run the frame no. by Ducati for confirmation of model and production date.
Yes, that's a P8 ECU which, AFAIK was only used on the original Strada and then subsequent SP and SPS models. The biposto used the 1.6M and whilst...
I balance my own, it's really easy but in order to fit a single-sided wheel I bought some cones, they weren't expensive so if your...
Side case here; Ducati hypermotard 1100 generator and case. | eBay
Not certain, I know there are some minor differences between some models, particularly the old 'small block' engines (600/750) being a tighter fit...
DUCATI 748 749 916 996 998 999 CRANKCASE ENGINE PROTECTOR 1098 | eBay This is for older bikes, I think it should fit yours?
