Separate names with a comma.
Indeed, you appear to have been lucky as it seems the crankcase is OK. The cover is easily replaceable and could still be welded but you may be...
Indeed I do. For the Female tank fittings you need the NPT threads rather than the BSP that (I think) are used in Triumphs and often advertised...
The metal connectors are good but beware that as standard they don't supply them with Viton 'O' rings. This is not a huge problem for the male...
I fitted angled valves to my Monster both front and rear (same wheels as SS) and my 916 has angled on the front but doesn't need it on the rear as...
On my 916 the fuse holder that supplies the fuel pump/relay (the bigger amperage of the two under the seat) melted. It was actually still working...
My '98 (TPG) didn't originally have the 'Ducati Racing' wheel but I had a problem in that the bike was supplied to me with the wheel not correctly...
OHT and VHT are correct cams for SS and early M900 (prior to 'W' heads). AFAIK 'V' and 'V2' heads are basically the same other than the valve...
I imported a Moto Guzzi from Italy last year. The V55 form they send has loads of sections, many of which are not appropriate so I called DVLA....
Sent you a PM.
How much would you want for it as it is?
Forgot to say, I also have longer bars on the 916 although I had already fitted them so couldn't tell you if it would all have fitted on the...
Switchgear is too wide, you need the M/C closer to the throttle, maybe you can fit the switchgear the other side of the M/C if the bar is long...
I check my 916 oil on the paddock stand, yes the level is slightly different than when flat on the ground but not by much. If it worries you, do...
Hard to see the damage to the case on the blurry pic but it doesn't look too bad. I'd pull the side cover off and see exactly how much is missing...
All 748, 916, 996 & 998 came with 5.5" rear. 748s were fitted with a 180 tyre, 916,996 & 998 with a 190. Early (maybe all?) 748s were also fitted...
Cylinder Head Services near Northampton recently did a first class job on my Guzzi heads for a very reasonable price. Cylinder Head Services
Sounds OK but I prefer black... ;)
Is that like black? :D
Black. I like black wheels, they look good and most importantly don't show the dirt and particularly chain lube, a friend had an early 900SS with...
Difficult one this, my 916 had an oil thirst some years back due to bore wear. I changed the valve guides, had the bores replated and new piston...
