Separate names with a comma.
Mine has larger air carbon tubes, I cut the fairing holes bigger to suit but they still use the original rubber gasket and clips to fix to the...
A decent carbon airbox should be no harder to install or live with than the standard version, the design is the same and will use the same rubber...
I have an Evo slave cylinder on my 916, very nice, well made part that has been working faultlessly for many years, they even have a bearing...
Even if the pistons aren't damaged, you'll need to take the head off to swap the valves. Once the head's off the cylinder will be loose and will...
Presumably (if valves damaged) then your piston(s) is beyond use anyway? If so then rather than buy new OEM pistons use these. Probably need to...
I have a stand like that and my 916 has a large hole in the bottom yoke (aftermarket Ohlins yoke as the Ducati yokes don't have a hole). I made a...
It is detachable, I removed mine to drill for a bolt to fit a temp sensor and I wanted to fit a bolt from the inside as the head's brass and not...
Don't know if this helps as it doesn't mention ST3 but it maybe the same as another model?; [IMG]
I prefer the Marchesini (but I'm biased as I have them on my 916). It also seems to me that 10 spokes might be stronger than 5? although I don't...
I've seen a few of the cheapo tools and reckon most are fine with the riveting of the link, where they fall down (and apart) is breaking the old...
You could try altering the PC map (backup the original first), add a little fuel at low revs and see if it helps?
Or just check (once) what the difference is and fill to that level when on the stand...
Service schedule generally calls for two years or a mileage (probably 6k) but you could get away with more, however I would want to check the...
I check it on the paddock stand, can't be bothered doing any fancy balancing act (same with chain tension) the difference is minimal either way...
A blanking screw; As the crankcases are common to various models e.g. 900SS/Monster, the ignition pickup cable passes through a plastic gland...
Italian tuneup - Wikipedia, the free encyclopedia
This help? [MEDIA]
Updated pic after some winter fettling, including replacing bent exhaust valves & pistons; [IMG] Hopefully get some miles on it soon...
I went to Colditz in the '80s when it was the old East Germany, spent quite a bit of time in the area. Roads were a bit run down then but probably...
I had exactly the same thing happen on my 916 some years back. I'd had it repaired following a collision that broke the clutch so the bike had...
