Separate names with a comma.
[MEDIA]
There are two (at least) versions of mono subframe, 1 for the (larger) P8 ECU and 1 for the 16M ECU but you will probably find more of the P8...
Is the 998S diagram not the same then?... It's not super clear but the wire colours are legible on the diagram on P.264 (P.265 for the 'key').
Directly from Translogic in the UK.
Length of the sensor or shorter would be OK, don't go too long or you may block an oil passage.
I would guess you've probably seen/heard of Britalia Moto's Supermono? The Supermono Strada obviously they're a business making these to sell and...
My last one failed between the filler and the side outlet and when the bike got really hot sprayed a mist over the inside of the screen and my...
Part no. 832.1.012.1A
As above, sounds like the coolant tank.
Think you need to download it.
Thread is M10 x 1mm. Stainless cap head bolt with crush washer?
Uploaded to here; Download - Hightail ECU diagram is on a separate page from main wiring, HTH.
I have a pdf copy of 998S workshop manual, not the greatest quality but legible and has wiring diagrams. Too large to email but I can upload to a...
Indeed, and if I did try it I think I'd stand on the other side when doing the lifting - he's never going to hold it from there if it goes over...
xx9 wheel will fit. I have 1198 forks on my 916 and am using a 916 wheel, just needs a spacer to replace the speedo drive plus 15mm offset discs....
[IMG]
Got some work there. I'll be watching this with interest, good luck. :upyeah:
Thought it was for rental?... :D
No strap, but there should be a small angle bracket bolted to the frame that sits over the ridge at the rear of the battery. Shame really because...
Motobat MB16AU is a good battery, much more kick than the OEM Yuasa lead acid. I have them on both my M900 and 916 both of which have raised...
