Separate names with a comma.
I've just been to the garage to look and definitely not. The forks fit (after boring the yoke) and they are the same spacing for the wheel etc....
I would think 45mm would be a good header size. Try contacting Mark at MADASL (he's on here) he may have something suitable and could certainly...
I have 916 Showas in my Monster and had the Monster yokes bored from 50mm to 53mm. Don't know whether the stem fitting is compatible though?
A bit pricey but; OXID eShop 4 | steering head in 'Superbike' version DUCATI 748 - 998 | purchase online
Oops got my slave n' master relationship wrong - Must have a word with the Mrs... :Bag:
But only around £90 from Oberon for a better quality part with a lifetime warranty and that will reduce the clutch pull...
Nice one, a word of advice - if you're using a 916 yoke and have it off the stem then get a hole drilled in it so you can use a headstock paddock...
Indeed, start with the basics - set TPS, throttle balance & CO and see what that does.
I got them from Spareshack who was In Jersey and sold Cyclecat stuff but it was many years ago and they're not in business anymore. Cyclecat...
Cyclecat - can be raised, turned and angle is adjustable via an eccentric but the best thing is that the bars are longer.
Got them from Harris, along with the yoke. They are an Ohlins part, I don't recall them being expensive. Here's a pic showing part the number.;...
I bought an Ohlins bottom yoke from Harris a few years back and got a pair of 'half-moon' clamps with it that let you grip it in the vice without...
Ah, my mistake. I read it as brake lines. I had a cooler line shortened at a local 'Pirtek' but they had to use the existing fitting as they don't...
I use Goodridge 'build a line' where you buy the (screw-on) banjos, available in different angles and then a hose with screw fittings at the end,...
You need a good, powerful polisher or drill with various stiffness of mops & polish along with plenty of time & determination but it's a dirty,...
Plenty of elbow grease required. Before; [IMG] After; [IMG]
I once used 'Gun gum' on my 916 exhaust as it was blowing a little at one of the midpipe joints. Did the job great but was a bastid to get the...
No it's a 17" x 5.5"
That's the correct scheme for a '98. Up to '97 they had the 'Desmoquattro' fairing decals & Ducati on the tank/nose etc., '99 saw the intro of...
I have the BMC filters on my 916 due to having carbon tubes with no filters. Bike made 118hp & 71lb/ft after a bit of fettling. The only thing I...
