Separate names with a comma.
You can buy a nice bike (possibly already with a nice exhaust) for that kind of money...
Spring binding aside, depending on the type of master/slave cylinder ratio (clutch travel) I find that 38mm is the maximum I can get away with and...
I had a local engineer turn me up these for my Monster; [IMG] Got to be better than a piece of shim stock.
848 have 320mm discs, 1098/1198 have 330mm discs however fitment is the same just that the larger discs require a 5mm spacer (and 5mm longer bolt)...
Not on radial calipers...
If they really are for 748R then they would fit but I would double check the offset first as many sellers don't know the difference (witness the...
On my Marchesini wheel the lip on the right side is too small to work with a spacer - the disc would not be on the wheel, only bolted to the...
I used the normal torque but you'd probably get away with less. The magnet is stronger than the original part though.
I have 15mm discs on my 916, looked at spacers but they wouldn't work on my wheels (disc not centered by wheel, only the bolts). These should be...
I have one of these; https://tpoparts.com/cat093/index.php?route=product/product&path=1_51&product_id=11
You can do it without a stand if you do one leg at a time....
As a 'youth' I went to many gigs, I even did an 800 mile round trip on a Ducati 250 Scrambler to see Led Zeppelin. :upyeah: Later on family life...
:upyeah:
As above, for MOT if it has a pillion seat it needs footpegs (and also a chainguard). Obviously single seaters don't need them and the...
Paint has held up fine, I didn't use any lacquer. Not sure if the colour match is perfect? but as I painted the whole thing it doesn't matter to...
Might be tough with the engine in the frame, access is not great. I had the 'luxury' of removing a tight filter from an engine on the bench and it...
I've got a homemade one you can borrow and fairly local to you. :wink:
I wanted something similar as the Ohlins yoke on my 916 has a huge hole in the bottom. I found that a suitable sized 1/2" drive socket pushed on...
1098/848/1198 front end will fit but if you get the Ohlins then you'll need a bigger bottom yoke (can bore the smaller) as they're 56mm rather...
Threads in mine are perfect. :upyeah: Although being a Monster there are no bolts in them...
