Separate names with a comma.
There recently was a set of new Carbon-fibre-rim spoked Monster wheels on ebay. Don't remember the price but you just know that a mod like that...
Here's a pic of what I've got. Looks rusty but it's actually stainless steel so would clean up nicely, the underside has a small scrape that looks...
I've got a 600 Monster midpipe section in the workshop that came with a box of bits when I was building the Monster, I believe it is the same as...
Linkage, ie Hoop and Rocker are the same, shock maybe different (think 900 got a better model) but are compatible - same length etc. 900 had...
You can get metal versions of the CPC fittings from Tom Parker Tom Parker Ltd, Preston: Hydraulic Fittings, Pneumatic Fittings, John Guest...
You have a PM. :upyeah:
If if the closer shim or, more likely the collets, wear then the closer clearances open up but if the valve seat or valve wears then it will sit...
Generally over time, closer clearances get bigger and openers get tighter. This is one reason you can set closers tight knowing they won't get any...
Doubt it's a straight swap but they could certainly be made to fit. The yoke is likely to be a different size/fitment, I'm using 1198 forks in a...
That's the one, the threads are OK on the other side of the sprocket but where they reach the side you want it's as if they only ran a taper tap...
I once took the sprocket cover off my 916 to find the retainer completely missing, I assume the screws came out because the inside of the cover...
Or speeding/parking tickets... :wink:
When I was a kid, people were always claiming to have seen UFOs but could never prove it - funny how that now everyone carries a camera no-one...
The speedo from (not fitted any more) my 916 has the red '55' on it. I've seen loads that have, funny thing is I'm not sure it was a requirement...
Price... is the problem IMO. I used to go to both Superbike and MotoGP races but stopped some years ago when the pricing got silly. Never liked...
I believe the single wire switch is a different size to the 2-wire. It won't be compatible electrically (without some work) as the 2-wire switches...
The seat looks good but not keen on the tank.
IMO acceptable would be 20%, 25% at a push. But when the rate is above 50% or, in the case of fuel over 100%, then it is wrong and totally...
Not without boring the openings as the cylinders are a snug fit. Don't know how far they can be bored?
100mm.
