Separate names with a comma.
Have a look at stuff by Birchwood Casey. They do a number of specialist products for use on guns. They have a Matt and Gloss touch up pen that...
[ATTACH]
Their cold blueing products work. No idea about this product for aluminium [MEDIA]
I managed to refresh the gold anodising on the rear suspension of my 999 with Tamiya Anodised model paint (spray). They may do an anodised black.
You need to check the suspect wire on the bottom of the yoke is not internally broken. A visual inspection may give the impression all is fine but...
The 1098S is a completely different bike to the 1098R. Whereas the 1098S has the quite brutal power delivery of the 1098 engine the R has the more...
If you can find an decent cost insurer they will insist on something like Motorbikes valued at £20,000 or over, have a BikeTrac Fitted
How much it will cost to insure if you want to ride it on the road.
A beautiful bike with the benefit of the 1198 engine. At that price have you looked into insurance cover?
Harley owners in the States having a similar problem seem to be recommending a product called Pig Spit Original.
As others have said, get an impact driver and drill combo set. I have a decent cordless drill but for some jobs I have to drill a pilot hole as...
You need the dash2 pro as the 999 sends info between the ECU and dash by canbus Here is an old post where I explained how it may be possible to...
Coil = ignition coil (Bobine) Can you check each link pipe for heat, please do not burn yourself.
Is there an indication of vertical or horizontal? Generic coil warning? Do the free/cheap stuff first. Check connections to both coils. Look for...
Even though I have the kit to read the immo chip, removing the tacho or speedo needles terrifies me. I would rather pay someone to do it. If only...
Right mechanical code (pattern key cut), wrong transponder chip in red key. Key being cut correctly allows ignition to be switched on, wrong...
Probably wobble like f@@k once the camera is mounted. I would replace the spacers with a solid block with two holes for the bolts. You can make a...
So you worked out that the two white lugs are a locking mechanism for the pins? You do not pull them out. Instead you use an extractor tool to...
You will need to fire up Google Translate https://www.scribd.com/document/643720478/SRV-TSB-16-006-PTB-pdf
The termination resistors will probably be built into components. The can hi and can lo system use a grey/green and grey/black wire from the BBS...
