Separate names with a comma.
They rarely line up very well. Not just Mivv... The silencers will be a generic part and then sold with link pipes to suit the bike. Try rotating...
The relay is more or less a consumable on the 749/999 due to the position of it. Always worth a check or swap it. Check also the connector for...
BUMP :) Will consider splitting these. Wheels - £650 each Discs - £500 a pair (these will fit SBK and SF back to 1098 models 330mm) Tyres £350 a pair
You're right that the 400, 600, 750 and 900 are the same. It's a different part to the SSie though. Neither are available now though as you've...
Bendix pads are now SBS. They were the same pads as Bendix own the SBS brands. The Bendix brand wasn’t as popular as the SBS, so they...
No problem. It was hammered into us on training last week. Not all the "do's and don't do's" in the owners books are PC health and safety stuff,...
Yes, the speedo is run off the rear wheel, the radar uses that information also but primarily uses time to maintain the distance as it's an active...
Changing the gearing on the V4 is advised against, mainly for most of the reasons above. It’s a definite don’t do it, if the bike has radar...
If you don't want wings and just need to tidy the mounting area up, you can get blanking covers. Part number is 97180871AA. They're about £100 but...
It'll be a Marelli. The siemens never went in a 749/999.
I’ve used Dodomat too. Very impressed. Used to it stop the drumming and road noise in my van. Used dynomat over the years on audio installs. Both...
DCPR9E’s here too. Used them for years without any problems.
Prices are all over at the moment. The £30k days are done for a while imo. A quick google and there's a massive spread. One for just under £13k...
I’d put a new seal kit in the master cylinder
Brand new, never fitted wheel sets, including new discs and Pirelli wet tyres. They are the "base" wheels, not the forged "S" type. £1800 inc. VAT...
No. 749/999 shocks are different lengths. You can use any 748/916/996/998 shock though. If you're not bothered about the "badge", have a look at...
The recall appears to be triggered by the mounting screws coming loose. This allows the composite to crack. The backrests aren’t fitted at the...
From experience, trust me…. If there are multiple options and scenarios, the errors and mistakes will multiply. It seems pretty difficult in some...
The chain tension should never be set on the centre stand. It’ll be way too tight when in use.
Spinning the bobbins has been a trick for years and is ok for a quick clean. Don’t get carried away though, especially if using a drill to spin...
