Separate names with a comma.
It looks like the chain tool you have is for hollow pins, like DID. The chain you have looks like a Tsubaki? They have a hard rivet link and need...
The DVT should be run on 15W/50. 7100 is my oil of choice.
No questions being asked of what you said. A "Desmo" service is not simply a belt change though. £380 would be around the cost I would charge in...
It's been released today :)
My thoughts to? £380 wouldn't cover the cost of parts and fluids for a DVT 18k service. Might cover oil service and belts, but that's not a Desmo...
As mentioned, motorcycles are not included in that agreement. Condition of the warranty is that the servicing is carried out within the authorised...
Nothing available from Ducati. I know sometimes it's possible to get kits from KTM, but that's an old master cylinder now. The one linked to above...
[ATTACH] My Honda..... NSR250 SP "Pentax" :)
Needs new lockset and dash. That’s at least the correct way of doing it.
The discount will far outweigh any advantage a "22" plate would give you. If it's a 22 model, then imo, it makes no difference. Doesn't really...
Ayup Jonny! You recovered from Xmas hibernation :) Hopefully see you soon in the real world, but good to see you on here as well. All the best x :p
Part is listed as 55910031A. They're showing as being readily available? There is another number for the 2000 996 which is now obsolete? The 996S...
They're £16 from your dealer...
It can be done with the motor in situ. Fiddly, but doable.
1098 is on the “new” schedules brought in around 2006 where the services were split between mileage and time elements. Valve clearances are 7500...
Look up Avanti Race Parts. They've repaired several for me over the years. Although the ECU is a pretty common one in the car game, I had no luck...
The "D" in the VIN, should be a "0" (zero)
The monster had an alloy one on some years… not sure if it swaps over though? Just an aside…. Did you check with your dealer on the part? They’re...
There’s nothing to gain…. The flexible lines are braided steel already. The hard pipes have even less flex.
There isn't a washer between the speedo drive and fork leg. There should be one under the nut though. The calipers are close, but there's nothing...
