Separate names with a comma.
It’s been discussed to death over the years, but hoot owl is correct. An MOT doesn’t make the vehicle legal to use on the road, it’s a...
Drop me a pm if you want with a list. Vin number would help with SPS parts. Some of what you mention could be hard to get, but I can give you a...
Check the “full service history” includes the 18k desmo if it’s on the mileage. That’s the big service and pricey to complete.
Sorry, I was thinking off the 4 way electrical connector. The fuel connector is a push in type. It needs to be square as it’s push home. Once in,...
It’s very easy to bend one or more of the pins unless the connector is lined up perfectly. Pull the plug and have a peek inside the connector.
Sounds a little light tbh. It’s only a guide we use to try and help the bikes thru the shop, but ultimately we still wait for the level. If you...
What level are you running the traction control at?
Moto Technica are now concentrating more on selling bikes than service. Lee does sell some mint used bikes if you're on the look out though....
When you say “belt service” do you mean an annual oil service with belts or a full desmo service? This gets confused a lot with the new schedules...
If you’re just looking at a gearing change, you have maybe 2 teeth to play with unless you fit a longer chain. 1 tooth off the front is the...
520 is simply a thinner, lighter chain. If you keep the sprocket sizes the same, there’s no change to the “gearing”. in truth, unless it’s track...
It’s possible for you to do the spannering, but wherever you decide to get it from, you need to sort a deal out whereby they will install the...
It’s just a depress on the clip to release. The fiddly ones are on the injectors and temp sender type connects
Your old ones look like DynoJet needles?
That one was issued back in August Andy.. Low numbers across only half a dozen batches of rotors. It'd get picked up during service as there's no...
There also a subtle but IMO, significant, difference in the amount the electrode projects into the combustion chamber. The NGK is recessed further...
Try a fresh ignition relay. Always worth a go.
No suicide stand on the 848.... check the mounting is secure in the cases and also the pivot bolt and lock nut are tight. There should be two...
I have similar tiles down in the work shop and get a similar thing in summer when the sun hits them thru the open shutter. There's a decent...
For gas, I uses SGS Gases. They have stockists all over the place. You pay a deposit on the bottle, but keep it as long as you like. When you...
