Separate names with a comma.
If you struggle getting a diag tool, you can go ‘old school’. Tbh, I still do it with out diag. The error reporting is crude at best. If you’re...
The clear sheet goes over the separate parts of the tank pad to keep all the sections aligned once they’ve been pulled off the backing sheet.
Sounds like the new plates have pushed the pack thickness out too much. With the pack assembled on to the drum, before you put the pressure plate...
M8 x 25mm iirc.
List is £4270 inc. VAT. Fitting IS a 'mare of a job. A day is a fair guess. Like Andy mentions, the software upload needs to be activated by the...
Wouldn’t say so. The old connection allows ingress of water into the coil stick and usually shows up as a short. You can try sealing it up, if it...
Old spec coil connection is directly to top of coil itself. The later type has the fly lead.
No.... I did to :p
Plenty of release agent in the hole, with the bike on the sidestand (to help it run into the thread) then heat the swingarm around the bolt area....
Have they sheared due to erosion of the heads over time? I've seen old clutches begin to polish/wear the screw faces. First plate in is a friction...
The power supply and earth for the diagnostic tool is taken from the diag connector. There's no separate PS. Trace the loom back in the subframe...
Never heard of them. Registered in UK but director is/appears to be Chinese?.... Prices are no better than Ducati but carriage seems expensive....
The power supply to the diag connector has failed. It’s on a short sub loom and connects to the main loom via a connector under the seat. Seen a...
V4 switch has no cabling. The bikes loom plugs into the switch. May be doable, but you’ll need a connector for the switch and loom to make a patch...
That's a first.... Only thing I can think of is that at each key on, the immo system generates a new code and that is transferred to the key....
Both those are burnt out. Agree with Steve about not soldering them... makes working on the bike (belt changes) a pita. Good connectors and...
