Separate names with a comma.
The FIM eprom was the original option for doing this. Just disconnect one injector on each TB. That’s all you need to do. The inner most were the...
I think Moto Rapido can supply them?
Cheers Nelson. Every days a school day ......... not seen them before!
@Dibble ..... what do you mean by tank cover?
You need to unscrew the actuating pin from the barrel first, then it will drop out. Refit and then screw the pin back in. There is a very small...
All brand new, boxed and genuine Ducati Performance kits @ 25% off RRP. 96480771A Panigale 1299 Akro silencers kit - £2192.20 inc. VAT 96480151A...
Shims rarely wear that much. It’s usually wear on the seats, valve surfaces, collets etc. that cause changes. The conventional wire collets...
pm me your numbers and I can check for you if it helps
Laser do a decent little tool to do the job. If the bearing is ok, you can remove the whole pulley assembly with an 8mm Allen key in the centre....
Yes. 5 years or 15k miles.
525 denotes width and pitch only. There are dozens of pin diameters and plate thicknesses, even from the same manufacturer depending on grade of...
I’d stick with oem figures unless Ducabike state any differently. The lower triple clamp screws are only M6. 8nm is fine. The centre cap is for...
Most of the "corrosion" is the ferrous content of the brake dust lying on the discs surface. The discs are stainless, but the brake dust embeds...
I like the carbon to. £ for £ the carbon is a proper good buy
No different to a UK bike. They're all the same now bar Jap/US market. Just a change of kmh/mph in the menu. Spanish are full power etc. Looks a...
I agree with finm on the Allen keys. I’d definitely go the extra and buy a good quality set, especially 3, 4 and 5 mm. I’ve used Facom and Bahco...
The primary gears are supplied as a matched pair. Crank and clutch gear. If one has been swapped, then there's a chance that's the issue. With the...
If you do drop them, bear in mind you'll need a pillion seat cover like in Robarano's picture. Come MOT time, if it has a seat it needs pillion pegs.