Separate names with a comma.
Sounds like the spider spring has given up the ghost. Pull the pressure plate and take a look. They crack around the base of the fingers
It's a shallow top hat spacer. Just in there to stand the rod end off the mount. You can use a m6 Spring washer if you're stuck. Quite are few...
That's a helicoil alright, but one that's been screwed in too far and the tang has been left on. The bottom coil has closed in on the bottom of...
Tickover is controlled using the air bleed screws and the CO trim. Balance/set the tickover using the airscrews. Raise the tickover by turning the...
Throttle stop shouldn't be touched. It's preset to the angle the TPS is zero'd to. Move it and the return signals from the throttle won't...
M5 X 20
The spring caps shouldn't move at all. If they move outwards when the lever is pulled, then the clutch pushrod is pushing the whole drum assembly...
If the spring caps are hitting the cover, then check the clutch centre nut hasn't come adrift
Yeah, should be fine as Andy said. They're M10 so 42 is in spec.
Big wheel nut is 230Nm. Iirc, Cush drives are 30Nm, but not 100% on the latter
Your nearest dealer?
On the matte/satin paints I use Motul Matte Surface cleaner. You don't want polish and you don't want to rub the paint surface anymore than you...
Heard about this today... There is no new magic upmap update. Only update to have been released was the one for the stock bike in 2015. Not sure...
Might be top end of, or even out of budget, but new ones are available again. Come with ECU as well. Drop us a PM if you'd like more info ;)
Sigma is very good, but that's a very good price for the DP unit! I don't have the prices of either to hand, but 260 quid is a lot. I'd put the DP...
no worries. A clutch holding tool is a must, but other than that a decent tool kit should be all you need.
Sigma for me. I've fitted several into customer bikes and had no issues with any of them. They do exactly what they say on the tin. Unless the...
No worries. I think you're on the right track. Sometimes you just need a different view to straighten out the emotions :)
Ok. Problems first.... The 796 motor isn't widely supported on the tuning front. You've found that out already. Other than bolt on parts, there's...
The new upmap keys need to be run thru the dealer diagnosis equipment to install.
