Separate names with a comma.
916R existed in '97 and '98 and was the customer spec race bike. Basically a race ready SPS without the lights etc. and race ready...
Defo sounds like DTC is cutting in. On level 8 it's second guessing that it's going to slip rather than spinning up. Try level 4 for starters
IMO it's more about the oil than how often it's changed. I use Motul and have customers doing 7500 on a sump full before it's changed. No issues....
Seen a couple of 848/1098 motors let go on the big end bolts but they were ex race/unknown history etc.... Seen mts1200 go on mains which I...
Yes Ben. Cornerspeed Ducati.
What Chris said. You only need pay for the lead.
I'm over in Sutton, just down the A38 from you. If you want it plugging in and giving a once over, I have the equipment to do that so at least...
Does sound like the battery. It may have 12v but not enough juice to fire the bike up. YT7 is correct. Li-on are coming on and price is getting...
There's a slim chance you can brick one of the ECU's
There's some free software about and along with a lead off eBay, you can do it yourself. Have a search around the forum for the details.
The black cover is held in on 2 rubber grommets and a small lip arrangement on the bottom. Gently pull the top edge out and it'll all become...
The wrench is an indication that service is due. It can only be cleared with software. The three flashes on the led are just an indicator of how...
Bent axle?
JT are ok. Renthal do a sprocket also. IMO I'd go Renthal
Yep, just take the spacer out. Can't see you needing any different lines. You're only moving the calipers 5mm.
To fit the remote reservoirs you'll need to replace the whole master cylinder.
Worth checking the hoses to the rad are both hot. Thermostat could be sticking.
Pretty much. Just give the bore a wipe out with some fine wet'n'dry. Watch the seal, it only fits one way...not the old one and refit as per that.
The early slave cylinders are rebuildable. The seal is a couple of quid and available from Ducati. Might be worth a go and stay 100% original if...
It's not as extensive as a full bespoke remap, but a Rexxer tune ECU flash works well on the 796. I've done a few now without any problems. O2...
