Separate names with a comma.
Actually it does, underneath the rear floor pan. However, I hazard a guess it gets really wet under there, the bolt corrodes and when one needs...
Yeah, I just found the bike-parts-Ducati site easier to look up part numbers than the Ducati Omaha one which is like a big pdf document you turn...
It was glued with Q Bond first. You can get the same effect as Q Bond with superglue and bicarbonate of soda powder. Staples were on the inside...
That’s a bugger. Was damn useful to look up parts diagrams and part numbers :worried:
Q Bond and a hot staple gun. I Cut a V along the fracture on the front once the parts were stapled and glued together then filled the V with...
SWB, a couple of photos with different bikes in there [ATTACH] [ATTACH] [ATTACH]
If you want to stay with Brembo you want 07BB37SA - LA are slightly longer lasting. They’re both HH friction rated, as were your OEM ones, the...
From memory the recommended torque for those nuts on the studs is very low, only 10Nm if I’m not mistaken. Just enough to compress the gasket.
A new ECU for that model is £1500 which makes me sceptical. Unless, they’re quoting for a 2nd hand unit but even then one has to be careful as the...
Put the MX bike in first. Put it as far to the right as you can. It helps to have a block of wood to bring the drop down step where the door is up...
I had one for 10 years until I got a Crafter back in August this year. I used it to transport bikes. It’s fine, as long as they’re not...
There’s Dragon Motorbikes in Gateshead, or P3 in Liverpool (assuming you’re in Cockermouth as per your avatar).
Presumably you used the high heat variant?
I’ve used the Engine Enamel on various occasions in the past, it’s good, provided you run the engine afterwards and cure it properly, or bake the...
Interesting. I read the other thread, and the posts linked to from that. I’m curious though. When the twist grip is twisted, the throttle valves...
Leave the new battery on the charger for several hours, eg overnight or a complete 24hrs. Let the charger run through a few charging cycles. If...
Caused by low/no voltage from the battery. The ‘pump’ you heard was, most likely, the rear shock running running through its range of movement...
Ok, makes sense I suppose, thanks. The owner does use this one as a track only bike but he didn’t know the thermostat had been removed. He has...
Can someone tell me please the reasoning behind removing the thermostat from within the Squirter unit on a Pani 899 ? This is the 2nd one I’ve...
As said, the exhaust manifold will have to come off but as the bike is brand new they’ll come out easy enough. You may be lucky and have just...
