Separate names with a comma.
I've fitted a few sets to customer bikes and there's nothing wrong with them at all. Very nice kit, fit well and good value
It's a maintenance thing as Antony says. Give it a clean with some wire wool and refit with a smear of anti seize and all will be well. There's no...
In terms of charger, I used optimate/datatool for many years. I recently took a long look at what was about and chose to move to Ctek. The...
The service schedules changed quite drastically in 2007. The earlier bikes were quite comprehensive regardless of mileage. Tbh, a bit of common...
The separation is the main issue... My tester won't pass them. If there's a use and construction issue then I think you can get pulled for them as...
That quite often happens. There are a few scenarios.... Safety related ones are issued in conjunction with VOSA and a letter is sent out. Then...
The 1098 sprocket recall replaced the rear sprocket with a stronger unit. The cutouts around the mounting had fillets forged in to them. There's...
The recalls are VOSA generated and sent out every couple of years to originally effected bikes. The recall may have been done but the paperwork...
No filter in the kit. The stock filter is pretty good tbh. Not used anything other than stock as of yet
You need a very narrow walled plug socket. I ground mine down to fit. The other thing I've had to do before is remove the screws from the cam...
The Mobil is a good oil. Make sure it's the bike specific one as per your link and you'll be sorted
Balance only using the air bleed screws. Don't touch the linkages at all. The air bleeds are on the RHS of the throttles. Front is easy to get to,...
I used to shift a lot of the shell like that Andy. It's only available in 1 litre and 209 litre drums so made sense for people wanting that...
Akro did the SL exhaust as it's all Ti and Termi don't manufacture in the material. The prices have slipped a little on the newer bikes now that...
No easy way....bigger torque wrench and the correct holding tool. Some of the torque settings in the newer motors are massive.
You've defo got spring binding then. Are the springs stock, or aftermarket? By the sounds of it, the pack is too thick anyhow. You can reduce...
Yes, the cover should engage with the drum and sit over it. Is it aligned properly? There is a slot in one of the spring posts and there should be...
Backing off the spring screws and it working, sounds like you may be getting the springs coil bound. Has the new pressure plate gone on at the...
If you pop the plastic covers off the back of the lights that cover the lamps, drill a small hole in the bottom maybe 4mm and refit. It's not a...
I've just landed some of the new 899 bobbins/sliders from Speedymoto. Usual quality etc. £45 :)
