Separate names with a comma.
Not seen one, so can't help directly, but have talk to bike torque racing. They are the new distributors. Speedycom are never a great deal of...
The oil debate has always been a fruity one :) I used Shell for a good few years, and have now been using Motul for the last 4 years, so have...
I've just took a few TES covers in to gauge interest and they look pretty good. More of a zip up tent than a cover. They have a groundsheet built...
Did you bleed the clutch master thru the small bleed inside the reservoir? 6mm hex, just treat it as a normal bleed screw. Is the selection of...
If the bike has a pillion seat then it needs hangers. Introduced last year I think. Fit a hard seat hump and it's negated. Evo tech is way...
If the bike has a pillion seat then it needs hangers. Introduced last year I think. Fit a hard west hump and it's negated. Evo tech is way...
Motul Factory Line has been lube of choice for about 4 years now Ozz. Very good.
I see quite a few with light rust on them, and without fail they are 'clean' whereas the chains that are visibly greasy/oily hold up much better....
Did you reset the TPS after the performance ECU swap? Without it, the ECU could be fuelling anywhere other than right. Would also help explain the...
Any of the sport classics are fetching really strong money. I think you'd get a pleasant surprise. I'd give ya 3.5k for it ;)
The only 749 to get ohlins forks was the R. The later S got different cams hence a few more ponies. The bike is an earlier one but obviously...
I remember that to. In theory there's some sense in it, but he was blessed with much higher ambient temps than us. A straight 30 grade is going to...
I'd run it in on a semi as mentioned. One thing worth doing is to get oil pressure around it before it fires. Pull the crank sensor connector so...
LOL......it's been all over the place this week. PITA but have keep at it if I need info and orders.... If you've not committed or need any more...
Ok. For reference, you may already know though, the RRP on the kit is £1695.30 inc. If you're in a hurry, make sure they have stock 'cause it's...
£1500 is a pretty good deal. It is quite involved, but not difficult. Just patience...and a bit of swearing ;) At £1800 it's more or less RRP with...
They're 60 or 70 pence a piece John
A good service history is obviously worth having when coming to resale, but don't get hung up on it being the be all and end all. Having the bike...
Problem with just loosing the one spring is that the pressure plate will now release off centre, not squarely... This will put pressure on the...
You could save some £'s by doing the fluids, oil etc. yourself. There's only two factors... cost of the parts and cost of the labour. Parts for...
