Separate names with a comma.
Nope. The 998 uses a complete loom for chassis and injection. Earlier bikes ran seperate looms with connections between the two. How bad is the...
should be fine. Look slike it's concentrate, rather than ready to pour, so mix with distilled water @ 50/50
I think QB are doing JHP's fairings Jon. Ian was into the moulds very early on after the introduction last year.
Defo sell monster privately. The two bikes are as different as chalk and cheese. Get a test ride and see if you think it's worth the swap. There...
Levering them out of the bucket without taking the bottom screw out :wink:
Watch the ones from Europe. LHD ;)
Wasn't me :wink:
I have a set of these on the wall Buy Hex Keys & Sets 8 piece T-handle metric hex key set RS REK56198RS online from RS for next day delivery....
the Teng stuff is excellent. I've used it in the workshop for 10years now and all i've had to do is service the rachets. I use the very same...
Might be worth checking wheel bearing and head bearings. Ideally, check wheel bearings with wheel out of the bike. Check also front end is bolted...
Modding the wiring and fitting a later 3 phase reg is defo worth doing. I'd go same way with cooler tbh. 748 doesn't need it, but 996 makes more...
I may have a few lying around Gilps. I can check on Tuesday. I cut them off when not needed. Might be worth calling HEL as they do fit them to...
Single injector is indeed a good mod on the 996. You don't need to swap the ECU, just the eprom. A "open pipe" chip for a 916 will be a good...
It's possible. You need to know whether the road is local or county council and get in touch with them. They'll send you a claim form. I've had...
Possibly be the reg/rec failing, could also be the generator? You can check that with an AC multimeter across the yellow wires going to the reg....
Understand :smile: just had a look and the circuit is run thru a 10A fuse so you should be fine. It covers power sockets, nav and alarms but as...
Check also the fuse rating on the socket circuit against the max output of your charger. Not my favourite way of charging tbh, moreso on the newer...
Thought that was a catchy title :cool: yep, just north of Nottingham Figaro
Couple of points on getting the bolts out... Personally, i wouldn't warm the bolt. It'll expand... Warm the wheel....it's alloy and will expand...
Bump :upyeah:
