Separate names with a comma.
Yep. Heard about it at the factory week or so ago. Don't know the costs yet though. Think there's a tweak to the mapping as well to make the most...
I'd stay away from the cheap slippers on fleabay tbh. Seen a couple fail. If you want a slipper, invest in a decent one. If your plates and/or...
Yep, like Bolds said. £20.93 each inc.
Shouldn't be anywhere near that. Drop me a pm and I'll get you a price in the morning
Nt many problems and a pretty underrated bike. Only real issues were with early, 04 ish, valve guides. Watch for smoke when it's up to temp. Tbh,...
That one's been down the road. Wrong mirrors, scuffs to engine casing, footrest hanger, riders pegs have been changed, tanks got wrong decals on...
The tank behind the headstock is an integral part of the cooling system and is pressurised. The tank in the V of the motor is the overflow. You...
Stunning! That's going to be a proper weapon. :)
What you've replaced are the reed valve and housings of the fresh air injection. This is in place to clean up the exhaust gases after combustion....
That'd do it.....£140 before you charge oil and filter out.........The north ain't all bad :upyeah:
Not unusual tbh. It's the drum settling back down against the drive faces on the back plate. Could be a weak or broken spider spring, could be due...
The 1.4 hours mentioned, is the standard time for the first service indicated by Ducati. I think that these are going to be published by Ducati...
It's also missing the screen and mirrors. If its imported, it won't show up on UK insurance. You can see the lock stop in one of the pictures and...
I'd walk away.....that's had a good thump from the fork leg or lower yoke. That would probably be enough to write the bike off if inspected for...
If you're sticking with the stock screws, the wellnuts are about 60p each from probolt
I've lost all the thread icons to. Neither Windows 7 or IOS6 show them...
Andy, that socket will work fine and is all you need to get the rear wheel off. The 41mm socket is for the sprocket carrier and you don't need to...
The stock fasteners are the fine pitch. You can get spares from your dealer or pro bolt do them.
