Separate names with a comma.
Have you not had the s/ware upgrade done that permits you to lower the bike when coming to a stop? Press and hold the suspension button for 3secs.
You’re right, it’s the same
How can the dealer who stated that know it’s big end bearing bits in the filter? And, was it a Ducati service centre? I also wouldn’t be...
It’s literally a 5min job to undo the 3 bolts that retain the slave cylinder and pull it off for inspection. As @RickyX says you may find it’s...
I organise a monthly meet for Italian motorcycles, the last Sunday of every month, in Kenmare. Started it last year, now we typically get around...
Most likely because the clutch plates have welded themselves together whilst it was standing and he can’t now engage neutral or change gear. By...
So, after your re-map/re-flash of the ecu did it default to USAsettings?
Good news, thanks for the update :upyeah:
It's reading in degrees F not C. 10C = 50F 45C = 113F
@yellowducmaniac Martin is correct but just to clarify if you’ve marked the pulleys AND the belts the marks on the belts will not line up again...
This who many use if not using OEM http://www.exactuk.com/about-exactfit-cam-belts/
Depending what you’re using for the diagnosis typically if they’re marked as stored faults it means they’ve happened in the past, are not current...
When you have the bottom pulley lined up with the mark on the crankcase the horizontal cylinder is at TDC, all valves are closed and there’s no...
