Separate names with a comma.
yep, JHP is Ducati Coventry and vice versa.... Most of the cylinders are pretty much the same in function, it's the looks that alter. JHP unit is...
Termis are still readily available thru your dealer. On the seat height, as well as the lower seat, you can also use the shock mount off the 696...
Spring and preload tube out. 155mm air gap. Spring goes in before preload tube, so they both gotta be out ;)
There isn't one.....it's only available thru the dealer software only at the moment.
The speedo will read exactly the same. The problem will probably be caused by the sensor air gap being altered. The nut that holds the carrier to...
It's not a requirement for the bikes yet to list specific volumes. There's a compliance with Euro emmissions standards though. The EVO complies...
That looks about right. Double check the driven plates for 2mm thick ones. There should be some in a new pack. If so, start the pack off with 2 of...
You don't need the head off to replace the opening rockers, but......... If you want the head off, use a 8mm bit from an impact driver set then...
No worries desmo :0)
A lot of the termi ECU's are marked up that way. Should be just fine. Like Andy says, any doubts, get it run on a dyno to check once its running
Not uncommon on the wirng colours. The swich gear and ignition switch are Jap and can vary. Loom side is usually consistant though so you can...
Just checked a 999 i have on the bench. Yep, it's defo ignition switch. The terminal is removable. Depending upon how it was treated when it was...
I'd defo get the belts changed out. Oil and filter and a fresh fuel filter. Dump any fuel that's left in as it's going to a bit stale by now. I'd...
Look like the connector to the ignition key switch. Pretty sure you can get new connectors for those blocks. ebay maybe? Think they look very...
Brand new Ducati Performance Termi silencer kit for the Panigale. £1295 delivered or fitted free Save yourself £200 :upyeah: PM or 01623 238944
I think the issue is the fact it's running on a slipper pressure plate. I run a 5mm spacer under the caps on my 748 with speedymoto springs. No...
It could be that retainer plate that's causing the problem. Try your original spring caps with the springs. The installed height is different on...
The thing that sickens me most about cases like this is that whilst these people get caught and sentenced, the charges are made only on that what...
For starters, just knock the bike into wet mode and see how it rides. Much simpler and you're not messing with default settings. If it's better,...
Er yeah...... sorry, i'd picked up on the 2nd post being a 750... Problem with car oils is that they're not designed to handle the forces and...
