Separate names with a comma.
The other valve...that's a 2V cam, so there'd be a second valve and rocker assembly mirroring the one that's shown.
Yep. Straight forward fit.
........................or a S4R :rolleyes::biggrin:
Looks like a MTS1000 wheel......the mags usually have 8 holes for locating on the rear hub. The MTS wheel lost the ribs. Mags usually have a small...
Worth checking the headlight bulb connections. Low beam is completed inside the rubber boot but the Hi beam has a fly lead which is usually...
If the rubber gasket is left out, along with the 4 little spacers it carries, there's a good chance the spring caps can rub on the cover.. If...
A new gasket is only a fiver
The bearing preload is critical to it all being worth while. It's impossible to assume that simply replacing the bearings will be correct. Measure...
I've just tweaked the rear ride height the other way on my 696. I've raised it using 796/1100 suspension mounts. The 696 parts would go into a 796...
The OEM 5 spokes are a little lighter. Not sure it'd be enough to notice, but you'd defo notice either a change to forged ally/mag or carbon. I...
That'd explain things!!!!
Clutch builds up pretty much the same as a conventional slipper. The difference, and it's a big one, is the cover plate and diaphragm spring...
'Bout right.....job is booked at 1.5 hours, oil and filter is £50 or so then HMRC take their cut. Labour rates create the biggest variances. I...
Front master cylinder and a set of decent pads will give the biggest improvemnet for £'s spent. Either look at a Brembo radial cylinder 19x18 or...
I wouldn't bother with a full system tbh. The packaging is so tight and clearance with the fairing is only going to give you grief. Fit the Ti...
It will stretch....there's only the one size.
Ask the seller to do one. If you don't like what you see, then leave it. He's still left with a useful document to show potential buyers.
Check they haven't got the old caps still stuck in there. If they came loose and came off when the plug caps were pulled off, then they won't fit...
DCPR9E is correct. You don't need a removable cap though unless you've switched the leads..
I'd heard that to, but not sure the R ran a 6" rear?? Looked in to a few options and the OZ took some beating. Only fitted a 17" rear but matches...
