Separate names with a comma.
I can’t upload the PDF as it’s too large but this was recently shared the FB V4/V4S group, you may have it already off your a member of that...
The instructions for those supplied by SW-Motech can be found here https://sw-motech.com/cosmoshop/default/artikelpdf/sbl_22_822_10000_b.pdf As...
Just adding my tuppence on fuel tanks swelling due to ethanol. It all depends on whether the tank is made from cross linked polyethylene or not....
I would have thought any half decent motor factors would carry a relay that matches (amps & pin layout) even if it’s not the same manufacturer.
At least you coughed up the fiver, nice bike and GLWS :upyeah:
A wooden spoon handle with a piece of cotton cloth wrapped over the end, meths or WD40 will shift the white fogging. Sadly there’s no way other...
Don’t fill it to the brim, only fill to the bottom of the filler tube whilst it’s on the side stand. Petrol expands as it warms and it’s sitting...
I wasn’t trying to make you squirm @bootsam I was/am genuinely curious and yes the explanations given by others above are plausible. :upyeah:
@bootsam I’m curious how fuel was getting to the plugs to wet them if the hoses inside the tank were shot to pieces :thinkingface:
Your battery went kaboom, did you fit a brand new battery or an old one?
Did you disconnnect the ht leads when doing the belts? It may or may not be a silly suggestion but they are connected the right way round aren’t...
When I was re-reading the thread you mentioned about removing an alarm, has the bike run since you did this or did you do this recently whilst...
Oops, I should have re-read the original post, I forgot you’d had this bike for ages and were simply re-commissioning it :(
This section of the forum is a bit of a desert as far as viewers go, you may be better off reposting this in the Techinical Help section or...
Are your HT leads and caps OEM or has someone replaced them with another part? I had a situation with a misfire on my 998 when it arrived, when...
Different fork I know, and I had no electrickery on mine, but on my Monster 1100S I had a clunk from the front end on braking or going over bumps,...
I'd say 15000 is a bargain for that :upyeah:
I suspect you'll have to strip the fork down completely to find out exactly what is making that noise, there's no point trying to second guess it....
[ATTACH] and therein lies your problem. Compare with @Sev photo above of how it was designed. Someone in the past has fitted a shite tail tidy...
@El Toro have bots invaded ^^^^
