Separate names with a comma.
My first thought was the different sngke as well but there’s no denying the Z and the D have been imprinted into the frame completely differently...
Can you post a photo of the wiring diagram? Or even better upload a pdf? It’ll save others having to search and make sure we’re all looking at the...
That was about a month ago, I’d guess the air temp was around 8c. The photo with the multimeter at 10.87 was what the old battery dropped too when...
I agree the cranking speed is good, I’m just going off my own direct experience Chris. In my case the situation was exactly as described by the OP...
The battery is FUBAR, change it, do not go down any rabbit holes until youve done that. I speak from experience, had a battery giving exactly the...
My gosh, I’d forgotten I’d gone that far in on that one :eek:. Yes, that’s how it should look if all is working perfectly and hunky dory. I’d...
I honestly don’t know, I’d try eBay but you may have to buy a complete set of steel plates . Many do without it having unknowingly cast it aside....
I would test the battery as follows: 1. Connect a multimeter, set to Vdc, to the battery terminals. Check the voltage, should be 12.5 -13. 2....
From what you’ve said I think the selector arm/return spring inside is the culprit . Before you do, however, (although it sounds like you may have...
It is quite difficult to find the concave/convex plate, I know on one of mine I couldn’t see the small dot as it was full of hardened clutch dust....
Judging by the state of the original fuel pump & gauze filter it looks like the bike has been standing unused for a long time, the fuel has...
Ok, done :upyeah:. My 998S so the same fuel pump & circuit etc. It’s a bit tricky trying to hold the phone, focus it and hold the torch to...
I meant I was speaking in a generalisation with regard to the fact none of us really know what’s going on inside the tank, unless of course that’s...
Point noted Chris, I was speaking in a generalisation there.
I don’t know how long this link will be valid for but I wrote an article on the other channel which will be of benefit to you so I’ve linked here...
I suspect it was that obvious in that short vid Chris as the tank was almost completely empty. In your case, did you have fuel in the tank? A lot...
Not me Chris, I believe that’s what the OP meant :upyeah:
I’d take the belts off and re-do them. When the crank Mark is lined up both the cams, H & V, should be lined up with their respective marks as...
Take a look at this FB group post, there’s a video of what you describe....
[ATTACH] Yes, the return fuel from the injectors can come out of that nozzle, I’ve seen it before. See post #4 above :( Yes you can reuse the...
