Separate names with a comma.
Ok.
Did you go for the eBay ones?
[MEDIA]
18/5/98
AA chap who collected my 1098 said it was the ecu. I said it is no way that, it’s the reg/rec so just load it up and take it home like a good chap...
I have had 6 Ducatis (still have 4) - of those, 3 have had reg/rec faults and two of those (748 and 1098) were in the first couple of weeks of...
Does the new R have a different seat? Superpole seat is a bit higher which would put more weight on your wrists. Perhaps also as it was your first...
You need to take the pressure plate off to tell if it's a slipper. What bike is it?
If I remember correctly, to fit the DP Hugger one needs to drill and tap a hole in the fwd RHS of the swing arm. The previous owner may have...
Stripped 749 to get access to belts. Ordered belts. While doing this I remembered fondly the first time I did belts - Crystaljohn came around to...
Relay is mounted behind the battery box in a most ridiculous location. You may be lucky that a previous owner has relocated it to a much more...
Nice bike - GLWS.
Good luck getting the swinging arm spindle out if the shock and ride height rod is seized…
Here’s the markings on my ones which are P/No 208973711: Looking at the eBay ones, they also have KBA61193 on them. As said, if they fit 1098...
I believe those will fit. They are 320mm DIA and fit a 1098 so should be compatible. I think the numbers on the carrier are not the part number...
@RC1 For a 749/999 you need 208973711. These are the same as used on 848/1098/1198/899/M1100S and probably more.
I would ha e no qualms using the 1 trackday old pads with the new discs.
Looks good!
It was me he borrowed the clutch plate off! He was (rightly) passionate about setting up the clutch on his Fugly to make sure it was sweet and silky!