Separate names with a comma.
That looks like the connector from the wiring loom that should go to the servo motor. Without being attached to the servo you will always get the...
+1 for RS Paints, they do little touch up bottles as well as spray cans. I used the bronze gold (plus the lacquer they supply to go with it as...
Thanks for the heads up on that. The manifold/exhaust headers are different on a 998 to the 996 (it being the Testrastretta engine) but they can...
Thanks and yes, first I'll get it running and put some miles on it over this summer before really taking it apart. It would be a shame not to use...
@Felstmiester each exhaust should have a Lambda probe screwed into it you can see one hanging off one of my exhausts in the photo. You'll find...
Agree, that's me having it arse about face, I fess up, thanks Geoff:upyeah:, post edited now.
You're too young ffs. Just in case you didn't take note the first time. I'm 59 and still cannot countenance riding one. That's not to say I...
You’re too young ffs.
I Hadn't noticed that, cheers:upyeah:
I've a 2009 Monster 1100S so similar motor, different styling. Contrary to @comfysofa and just FYI I have seen 4 bars on the oil temp but only on...
https://www.ducatiforum.co.uk/threads/exact-start-cables-timing-belt-2v-coil-kit-link-forum-discounts.36761/ @Exige
Just one thing it will be Dot4 that's in there so make sure whatever brand you use to top up it's DOT4 rated as well. DOT5.1 will be OK but DOT5...
Shame he sprayed it gold inside. Also, it's missing the locking ring.
That's the real McCoy Ohlins on the rear there, surely?
@DavidC FYI
Welcome to the Forum AyEe, post some pictures when you get her won't you :upyeah:
Dot 4 brake fluid - it's all the same regardless of whether its clutch or brake.
I didn’t know that, I assumed it was solely for the alarm which was a dealer fit (otherwise alarms would be going off right left and centre as...
Are you 100% certain they’re all flat? The difference is imperceptible. Without examining every single drive plate individually, both ways up,...
As per Derek above. On my 1999 748. The alarm is connected into the wiring loom via an ‘official’ factory connector (ignoring the feeds to the...
